Model: NT4250DCG_1500SZ
Location: Spain
Year: 2010


Top turning-milling center in very good condition with equivalent main and counter spindle 26/22kW , lower turret with driven tools, subspindle, tool spindle in Capto C6 version with 12,000 rpm, tool magazine with 100 places. IMMEDIATELY AVAILABLE !!!



Control: MSX-711IV (Fanuc) / MAPPS IV

Turning length mm: 1.542
Turning diameter f. Tool spindle mm: 660
Turning diameter f. lower turret mm: 350
Bar work capacity mm: 80
Rapid traverse tool spindle X, Y, Z,, m / min: 50,30,50
Rapid traverse lower revolver: X, Z m / min .: 30
Rapid traverse counter spindle m / min .: 30

Tool spindle
Tool spindle full indexing specifications
X travel mm: 750
Y travel mm: ± 210
Z travel mm: 1,550
B-travel degree: ± 120 (indexing increment 1º index)
Tool system: Capto C6
Tool storage capacity: 100
Speed ​​spindle rpm: 12,000
Drive power spindle kW: 18.5 / 11

Lower turret
X travel mm: 195
Z travel mm: 1.525
Number of tool slots St .: 12
Speed ​​driven tools RPM: 6,000
Drive power driven tools kW: 5.5

Main spindle
Speed ​​spindle rpm: 4,000
Drive power spindle kW: 26 / 22
Spindle nose: A2-8

Sub spindle
Speed ​​spindle rpm: 4,000
Drive power kW: 26 / 22
Spindle nose: A2-8

Coolant system
Tank capacity liters:
High pressure bar: 70

Tool magazine with 100 tool places for Capto C6 for tool diameter up to 70mm, up to 140mm without adjacent tools
Super-high-pressure coolant system I/F (7.0 MPa)
Coolant gun
Chip conveyor (right discharge, hinge type) (/1500)
Automatic in-machine tool presetter for tool spindle and turret 2
Signal tower 3 layers (red, white, green)
Chuck foot switch (double) for spindle 1, 2
Additional in-machine light
Kitagawa SS1881hollow cylinder & drawtube assembly, in preparation for SMW quick jaw change chuck (Spindle 2)
Kitagawa SS1881hollow cylinder & drawtube assembly, in preparation for SMW quick jaw change chuck (Spindle 1)
Part program storage length 1,280 m (512 kB) in total + Registerable programs 1,000 in total
Installation of high-speed skip terminal
Renishaw probe pre-installation (probe not included)
High pressure (70 Bar*) coolant unit, with twin cartridge filtration system
*(Only for tool/holder with max. 2mm orifice – over 2mm will result in reduction of pressure)
Chip bin, tilting type
SMW KNCS-N-275-86/A8 quick change 3-jaw chuck, with drawtube connector (Spindle 2)
CE Spec

Working time hours
Power ON: 36.529
Cutting time head 1: 12.760
Cutting time head 2: 58

Basic machine dimensions / weight
Length mm: 6,478
Width mm: 2.980
Height mm: 3,264
Weight kg: 26,600

Fernando Mainar Val / Purchase-Sales Europe: +49 160 96787736

Backoffice Dpt.

English / German / Spanish / Italian:

+49 211 69991398 / +49 171 3383306

Jaime Ibáñez Portero / Purchase-Sales Spain: +34 639204449

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

Aviso de cookies
Open chat
Powered by